Product Description
The Wood Insert Sleeve is used to cover the hole wherever cable exits a wood or vinyl post on a level run, creating a clean look. These sleeves are necessary in some applications where the cable leaves a post at an angle (i.e. turning multiple post corners, etc.). With the beauty of 316 stainless steel, the Wood Insert Sleeve brings a look of elegance to any Viewrail cable railing system. The Wood Insert Sleeve can be found in the Wood Level Tension Kit.
<h2>Product Q&A</h2>
You must be logged in to post a comment.
What diameter hole needs to be drilled in a wood post to accept the Wood Insert Sleeve (VR334)?
Hi Brian,
You need to drill a 1/2″ hole the wood post to get this to fit correctly.
Please let us know if you have any other questions.
What is the inside diameter.
Hi,
The diameter of the center hole is 0.17″, which is just slightly larger than the outside diameter of our 5/32″ cable. Please let us know if you have any other questions.
What is vertical spacing requirements for post
Thank you for your question, Ralph. In relation to our cable rail posts, we recommend spacing placement to be not more than 48″. If we can assist you with anything further, please let us know.